I have a set of rain tires and wheels for sale.

Fronts are 4.5 Bridgestone Rain Tires (1 race old) mounted on aluminum 17mm DSM wheels.

Rears are 6.0 MG Tires (unsure of age) mounted on metric bolt pattern aluminum wheels.

I will consider trading for the following 5" american pattern wheels with Bridgestone YHC or YKC tires, Camber/Caster Gauge, Honda Clone Engine, Mychron 3 or Digatron Tach, or 6" oval wheels.

These were used once after I purchased them. Switched to an oval kart and no longer need these wheels. They are located in Pittsburgh, PA and I can ship.

$125 plus $10 shipping and I accept paypal.

Mike,

I don't need the rain tires, but I have a boat-load of 5 inch American pattern wheels. I'll check what I have and let you know. I may be interested in a trade for your metric pattern wheels.

I also have a complete MCP brake system for a 1-1/4 axle (includes master cylinder, lines, caliper, disk, and hub). Almost new (3 races old?). Let me know if you're interested in that.

Bill

I am definetly interested. I would sell the rims only but I dont have a bead breaker right now so I really wanted to get rid of them as a set. Let me know if you wanna do something and we can make a deal on those. I also need some other odds and ends stuff to so maybe we can make a deal for the bare wheels and some other stuff also.


Thanks
Mike

Mike (or anyone else),

Here's what I have:

American pattern wheels (width measurement from inside bead):

Qty. 2 - Douglas silver - 6-5/8 inch

Qty. 2 - Douglas silver - 8-1/4 inch

Qty. 2 - Douglas silver - 5 inch - spindle mount (new)

Qty. 1 - Douglas silver - 8-1/8 inch

Qty. 2 - Douglas silver - 5-1/2 inch w/used Bridgestone YHCs

Qty. 4 - Douglas black - 5 inch w/used Bridgestone YHCs

Qty. 1 - Van K red - 5-1/2 inch

Qty. 1 - Van K black - 5-1/2 inch

Qty. 20 - Split rim halves - various widths

Used equipment:

Qty. 1 - Set of black G-Man body work w/spare side panel

Qty. 2 - Rear hubs for 1-1/4 inch axle

Qty. 2 - Rear bearing hangers (enclosed) for 1-1/4 inch axle

Qty. 1 - Digatron DT-32 tach/temperature gauge

Qty. 1 - Complete MCP brake system for 1-1/4 inch axle - master cylinder, lines, caliper, disk, and hub (almost new).

Qty. 1 - Laydown seat for oval kart - small.

Qty. 1 - Rear 1-1/4 inch axle - 42 inch long - not quite perfectly straight

Qty. 5 - Various 4-cycle pipes (fits Raptor and ?)

Qty. 3 - RLV 4-cycle silencers

Used Bridgestones:

Qty. 1 - set of 4.50/6.00 inch YHC

Qty. 1 - set of 4.50/7.10 inch YKC

Qty. 7 - 6.00 inch YHC

Let me know what you need and what you have (i.e., description of your metric pattern wheels).

Bill

Would you know what size the rear rims are for yamaha jr?

The rear wheels are 180mm wide I believe. I would be interested in trading for the digatron tach and also by chance do you have any front hubs for a 5/8 bearing or a 2qt fuel tank? I will get some pics of the tires and wheels tomorrow evening when I head over to my shop.